Dry Rot Repair – Saving Your Rotting Home

Jeff Schleuning  -  May 16, 2017  -   -  No Comments

Dry Rot Repair

Wood is a major component of any home. You can find it almost everywhere from the walls and roof right down to the foundation of the home. Dry rot is therefore a big deal when it is identified in a home. It can easily affect the structural integrity of your home.

Understanding Dry Rot

Despite the name, Dry rot occurs as a result of exposure to high humidity levels (above 20%). It is caused by a fungus known as Serpula Lacrymus. This fungus feeds on cellulose. It therefore breaks down wood to access the cellulose in the cells of the wood structure, leaving a trail of dry and weakened timber.

The problem with the fungus is that it can continue destroying wood indefinitely unless stopped in its tracks. It continues to feed on timber until it produces fruiting bodies. These fruiting bodies produce spores that start the life cycle again.

Spotting the fungus can be tricky. This is because timber affected by it doesn’t feel damp to the touch. However, keen observation will reveal white growths on the timber. These spots emit a spore dust that is dark red in color.

If you suspect that you have a problem, be sure to contact a professional for inspection. They will have specialized tools and equipment to detect the fungus and determine how extensive your problem is.

Common Areas for Infestation

There are areas in the home where wood is exposed to high levels of moisture. These parts of the home are common sites where the fungus can be found. They include:

  • Doors
  • Decks
  • Windows
  • Siding
  • Porches
  • Shower walls
  • Trim
  • Floors in bathrooms
  • Caulking
  • Areas of the roof that lie near gutters
  • Where wood floors meet concrete foundations

What the Experts Will Do

Once you have determined that your home is affected by dry rot, it’s time to take action. This will ensure that you don’t give the fungus an opportunity to spread to other parts of the home.

Get in touch with an expert to ensure that you get rid of the fungus. Remediation occurs in four steps depending on the severity of the infestation. These steps include:

  1. Stopping the moisture at the source – This depends on the source of the moisture. It may include waterproofing or repair.
  2. Exposing the full scope of the infestation – This may involve breaking down some walls and structures.
  3. Removing infected wood
  4. Treating infected areas with fungicide
  5. Replacing wood

Contact us today for more information!

Leave a Comment

Your email address will not be published. Required fields are marked *

*

 
Read previous post:
water seepage
Inexpensive Ways to Prevent Water Seepage in Sterling Heights MI

Water Seepage in Sterling Heights MI There’s nothing more distressing to a homeowner than to find out that their investment...

Close